Multiple Spindle Oscillation Mortiser YOM-3

Outstanding Features:

• This highly productive mortiser is designed for producing various mortises simultaneously.
• Flexible head combination to meet specific job requirements.
• Double tables on front and back sides, permitting both sides operations for increased efficiency.
• Cutter speeds are frequency inverter controlled, providing variable speeds change.
• The entire operation motions are conveniently controlled by simply pressing the foot switch.
• Each carriage is adjusted independently.
• Two speeds cutter oscillation permits high/low speed change.
• Carriages slide on big steel rods. High speed cutter oscillation features maximum stability.
• Mortise width and depth are adjustable.
• The machine is designed for both mortising and drilling functions.
• Carriages are well constructed for adjusting mortise width independently.

Mortising Head

• Mortising head is directly driven by an independent 1.8HP motor. Two cutters fitted on both ends of spindle perform both sides mortising simultaneously.
• Mortising head position can be adjusted in right/left, up/down directions.
• Collet chuck clamps /unclamps the cutter for quick tool change.Mortising Head

Carriage

• The machine is constructed of three tilting carriages and one horizontal carriage. Each carriage can be fitted with one or two mortising head as customer's requirement.
• Each carriage can be tilted independently. Maximum tilting angle is 20°.
• Picture shown model YOM-4 is equipped with three tilting carriages and one horizontal carriage.Carriage

Variable Cutter Speed

• The cutter running is controlled by a high performance frequency inverter, permitting for variable speeds adjustment. Wide speed range is from 6,000 to 12,000 RPM.Variable Cutter Speed

Control Panel

• All of machine motions are grouped in one control panel for operation convenience, including cutter oscillation, motor ON/OFF control, and clamping cylinder control etc.Control Panel

Independent Mortising Head Control

• Each mortising head is controlled by an independent switch. The operator may adjust mortise position as desired for maximum flexibility.Independent Mortising Head Control