Production country: China
Brand
ENKONG
Drilling Hole Diameter
5 mm — 220 mm
Max. length of glass sheet
2700 mm
Max. width of glass sheet
2200 mm
Glass sheet thickness
3 mm — 20 mm
1.General description:
1.1 ZJ130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit.
1.2 An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual.
1.3 Holes of different sizes can be achieved with bits of different diameters.
1.4 this machine works efficiently, it has low glass damage and is easy to operate.
II. Technical Parameters
1. Hole Diameter: φ5φ220
2. Glass thickness range: 3 ~20 mm
3. Max. size of Processing glass: 2700×2200mm
4. Height of Working Table: 1000mm
5. Distance between drilling center and back column:1300 mm
6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2
7. size: 750×2200×1700mm(L×W×H)
2200×2500×1700mm (with floating working table)
8. Weight: 1200KG (with floating working table)
9. Voltage: 380V/50Hz
10. Power: 4.95Kw(with air compressor 1.5kw
